89 RS 305/TBI to 350/Carb wiring hlp pls

[Derek_Y]

recently changed out my 89 305/TBI to 383/Carb I was sure that I had everything wired correctly as everything works inside the car and out except when I turn the key the starter does not crank. Does anyone have a wiring diagram for this swap or can anyone draw me one up. I only need the basic battery / alt / starter / dist / ignition wiring as everything else im sure is working. thanks in advance

[corky]

Just a guess, there are two small terminals on the starter, make sure you have the wire on the correct one. Make sure all your connections are tight, use a test light to make sure you have juice to the starter.