something wicked is on it's way to the streets

[ErinRS91]

hey everyone, i want so share some pics of my project. it should be running next week with a healthy 12 pounds of boost and the new LS1 operating system:)

[Mkos1980]

What a nice install. Wonder who did that....

[91LT1Formula]

Bout time you did something Erin.Nice work, glad you did all that urself.HEHEHE

[ErinRS91]

ah c'mon you all know who does the work on my car lol....i thank matt for everything cuz without him, it would of never happen :)

[ErinRS91]

more

[Mkos1980]

We are also sporting a new BeCool radiator and Edelbrock waterpump for extra cooling since the intercooler is now in the way. I still have to install the BOV, SC oil and replace allll those shitty hoseclamps with some turbo ones. The ones ATI gave us suck and they slip. I also need to repostion the fans so they dont hit the rad, come up with a way so the upper hose doesnt hit the belt, and reinstall our remote tranny filter housing since it was in the way of the IC before. Once we get that, we got 2 step colder plugs and have to get 2 bungs welded in. One for the other banks 4 wire 02 and one in the Y for a WB

[chainsaw]

sick!

[Nick T]

Nice!

[sc1twntrbo]

looks slow

[Cashmunson]

will you have enough power to drive on the interstate now?

[MrDude_1]

LS1 OS??? tell me more about that..

i mean, if you have a 24x crank trigger and a cam sensor, i could see it as being possible, but you're not using the coilpacks...?

[Wacky Tower]

They are using the ecm from a chevy express van that has odb2 and uses a distributor along with the cam sensor. There is a big thread on TGO in the TPI section about it. Im sure Matt can chime in and give you more info.

[Mkos1980]

The car runs off a 411 ECM and 01 and up LS motors. We have to run a single roller timing chain, then crank reluctor ring, a 96 and up Vortec plastic timing cover case with crank sensor. Have to have balancer shout machine down about an 8th Up top we use a 96 and up vortec dis crab style which utilizes a cam sensor, vortec ign coil and module which recognizes the 411 and a 4 wire 02 in each bank. Its very nice now because we can tune we EFILive on the fly. Custom Harness was made for both our cars. We got the idea from an 01 Express Vin R

[Mkos1980]

Accually when we hooked up EFILive it came up as my PCM was from a 02 Z28 and Erins was from a 01 2500HD

[Mkos1980]

Once we get the 02 in, plugs, oil change and fire it up we'll give a report how it sounds as we really cant drive do to salt and snow booooooo. When I got a dis for my car I went with the only aftermarket one available which was the accel billetech , but when we got erins used I was surprised the whole damn shaft was plastic!!

[ErinRS91]

will you have enough power to drive on the interstate now?

well, i've had a quite a bit of practice and no longer afraid to drive the interstate. I'm comfortable with tearing up the highway in my car.

[87IROC Z]

Very nice!!

[Cashmunson]

well, i've had a quite a bit of practice and no longer afraid to drive the interstate. I'm comfortable with tearing up the highway in my car.

sounds good, when do we get to watch you kick the formula's ass?

[Mkos1980]

Anytime theres a race she'll kick my ass no doubt!

[nicksLB9]

that's 'cause you're scrawny. :D

[Mkos1980]

:finger:

[Blu91Z28]

Nice!!! I think it's safe to say Erin will have the quickest 3rd Gen of the locals who frequent here, unless Nick finishes his IROC. What's next? A 12 bolt or 9 inch?

[Nick T]

Don't look at me, I don't ever plan on having that car back on the road again.

[Mkos1980]

Nice!!! I think it's safe to say Erin will have the quickest 3rd Gen of the locals who frequent here, unless Nick finishes his IROC. What's next? A 12 bolt or 9 inch?

HaHa well find out when the time comes. Shit, Erin would get her ass kicked if nick got his running again. That thing sounded like a frieght train .

[TPI383]

Verry nice. makes me want to get off my ass and assemble this 406 with the big old turbo I have layin around....

[nicksLB9]

that'd be a good idea, but what good would that do w/o a car to put it in?

[TPI383]

that'd be a good idea, but what good would that do w/o a car to put it in?

Ive got a 89 Z what are you talkin about?

Already put a cage , all my suspention crap and 4th gen int. in it. 9inch is about ready to go in.

[ErinRS91]

Nice!!! I think it's safe to say Erin will have the quickest 3rd Gen of the locals who frequent here, unless Nick finishes his IROC. What's next? A 12 bolt or 9 inch?

yeah for now....i know matt is already plotting out a way to make his car faster than mine.... ;)

[-DARKSIDE-]

Nice!!! I think it's safe to say Erin will have the quickest 3rd Gen of the locals who frequent here, unless Nick finishes his IROC. What's next? A 12 bolt or 9 inch?

not only quickest, but nicest aswell!

[nicksLB9]

Ive got a 89 Z what are you talkin about?

Already put a cage , all my suspention crap and 4th gen int. in it. 9inch is about ready to go in.

You bought a Nissan? :poke: How did you get this one done so quickly when it took you at least 2 years to get that far on the convertible?

[nightrider]

how much boost are you pullied up for? compression? This is likely all already somewhere.

[TPI383]

You bought a Nissan? :poke: How did you get this one done so quickly when it took you at least 2 years to get that far on the convertible?

It didn't take that long on the vert. The vert has been sitting with all that done for 2years. I was procrastinating on the mini tubbs on the vert. and what motor to put in it. Im still debating on the 400 or a 350 I have or sellin it all and buyin a LQ9.

[ErinRS91]

i got a 12 pound pulley on there now i think my compression is 8:4...i'm not real sure..lol. matt will know.

[Mkos1980]

i got a 12 pound pulley on there now i think my compression is 8:4...i'm not real sure..lol. matt will know.


Yup shes got it right. Damn it blows alot of air. I fired it up with the pipe from the fender to the TB off and its like a hairdryer lol

[SpeedyZ28_MI]

Wow Erin, the car looks mean now. You have come a long way from pink rims and a V-6. LoL

Take care guys,

[Mkos1980]

Mike, were going to be up in Kalamazoo for the power tour on Jun3rd and also were going to be in ann arbor again June 29, 30 and July 1st for superfest. Ya gotta make one show at least.