Lethalrides2k3
10-06-2006, 10:43 PM
selling my prototype turbo kit (this is the same kit i sell new for 2,800)
includes
all hot pipes
turbo t04e stage 5 57 trim (capable of supporting 450 hp)
injectors
blitz dd style bov
front mount intercooler
2.5 and 3.0 inch cold side pipes
3 inch downpipe (bungs for reg o2 and wideband o2 sensor)
inlet pipe for maf systems
all mounting brackets
oil feed and return lines
48 mm wastegate with 3.63 and 9.0 psi springs
manual boost controller
all couplers and clamps
coolant resivor tank(stock tank must be removed)
this kit was used for approx 3k miles
asking 2,000
full bolt on and go kit no engine mods necasary(if running under 12 psi)can be installed by most ppl in a few hours. requires a pipe fitting welded into the oil pan for the return line.and the downpipe must be welded to the cat.
kit will make 255rwhp on a bone stock 2.8L@5 psi over 300 rwhp @ 12 psi
pics available on request
includes
all hot pipes
turbo t04e stage 5 57 trim (capable of supporting 450 hp)
injectors
blitz dd style bov
front mount intercooler
2.5 and 3.0 inch cold side pipes
3 inch downpipe (bungs for reg o2 and wideband o2 sensor)
inlet pipe for maf systems
all mounting brackets
oil feed and return lines
48 mm wastegate with 3.63 and 9.0 psi springs
manual boost controller
all couplers and clamps
coolant resivor tank(stock tank must be removed)
this kit was used for approx 3k miles
asking 2,000
full bolt on and go kit no engine mods necasary(if running under 12 psi)can be installed by most ppl in a few hours. requires a pipe fitting welded into the oil pan for the return line.and the downpipe must be welded to the cat.
kit will make 255rwhp on a bone stock 2.8L@5 psi over 300 rwhp @ 12 psi
pics available on request