IRace Motorsports

[Jim85IROC]

Please delete this if I'm breaking any Spam rules. :)

Anyway, for those who don't know from my whoring on ne3g, I've recently become a dealer for a whole bunch of stuff like headliners, seat sovers, door panels, carpet, wheels and some other stuff. My prices are a couple bucks lower than anywhere else on a lot of this stuff.

If I didn't goof up the code, click on the pic for my website.

http://www.iroczone.com/images/sponsors/motorsportsbanner.jpg (http://www.iroczone.com/jim/motorsports.htm)

[MrDude_1]

you have any 3rdgen doorpanels that clear rollbar doorbars?

[TMoNeE]

You only get the polished AR Rebels or do you have the black ones with the polished lip?

[llwood]

so i have to send you my 250 dollar set of components for you to make my kicks ohhhh boy you asking for alot of trust

[Jim85IROC]

you have any 3rdgen doorpanels that clear rollbar doorbars?I don't know why the flat door panels wouldn't clear... they're only about 1/4" thick. The arm rests might be a problem, I have no idea. These are stock replacement style door panels.

You only get the polished AR Rebels or do you have the black ones with the polished lip?I can get anything that ARE sells. They sell the black ones under the Motegi name, but I don't know if they offer the Motegi style in the 5x4.75 bolt pattern. I can't imagine it would be hard to get them configured properly if I called though. Just keep in mind that I don't think the Rebels are available in an offset suitable for a thirdgen without spacers.

so i have to send you my 250 dollar set of components for you to make my kicks ohhhh boy you asking for alot of trustNo, you don't have to send me anything. You can have a local shop build you the same thing for about 2-3x the cost if you don't want to send me your stuff. But I've been around the thirdgen community long enough that my reputation is pretty well known. I've built plenty of these already, and I'm currently working on 3 sets for customers. Check out the thirdgen.org car audio board and you'll find a few guys running my kicks.

[llwood]

No, you don't have to send me anything. You can have a local shop build you the same thing for about 2-3x the cost if you don't want to send me your stuff. But I've been around the thirdgen community long enough that my reputation is pretty well known. I've built plenty of these already, and I'm currently working on 3 sets for customers. Check out the thirdgen.org car audio board and you'll find a few guys running my kicks.
Relax i was just messing with you i saw some of your posts over on TGO a while back

[MrDude_1]

I don't know why the flat door panels wouldn't clear... they're only about 1/4" thick. The arm rests might be a problem, I have no idea. These are stock replacement style door panels.


the arm rests are the problem. :(

[GK]

LET'S BAN JIM! OUR RULES ARE SUPER STRICT! DO IT! DO IT! DO IT!! :kiki:

[TMoNeE]

Score me a price on those Jim... I have a 4th gen rear and spacers in front so price em for a 4thgen...

i know they come and 17 and 18 at least... id like 17" fronts and 18" rears... so let me know.. also shipping to 93720

[Jim85IROC]

18x9" Rebels with black spokes, 5x4.75" bolt pattern, 6" backspace are $195/each.
17x9" Rebels with black spokes, 5x4.75" bolt pattern, 6" backspace are $185/each.

Shipping will be up to 30-40 per wheel. I'll have to get an exact on the shipping when I call to order.

http://www.americanracing.com/dealerline/blackimages/blackbig/b399.jpg

[TMoNeE]

Thanks for checkingon that Jim..

[Jim85IROC]

you have any 3rdgen doorpanels that clear rollbar doorbars?
I called the door panel people today. They said that all of their door panels come whole, with no cutouts. The backing board is perforated for those who need to have the cutouts for arm rests, door latches, etc, but it's up to the buyer to pull out the perforated spots and cut the fabric. So... you guys with no arm rests should be happy with these door panels.