Fuel Lines For Holley Stealth Ram

[87TAWS6]

A guy from work told me that with my new holley stealth ram for my TPI motor, i need to get new braided fuel lines. Do you guys know what size the AN fittings are, and how long they need to be? Any help from someone whos done this before would be great.

[Jeremy]

Yep, the fittings on the fuel rails are all -6AN, and your stock fuel lines are 14mm and 16mm fittings with o-rings. The length of the lines depends on how you want to route them, or if you are adapting your stock rubber lines, or if you are running all new lines from under the car...

[86WS6_T/A]

I used about 3 1/2 feet when I did my stealthram conversion. I had it connected to the stock lines on the drivers side frame rail and ran it back behind the brake booster , then over to the back of the manifold.

[87TAWS6]

can either of ya post a pic so, i can get an idea of what to do? Also 86WS6, how much hp did ya gain, could ya really feal it or not much? I figure ill feal more top end (especially with the MSD distributor) which is what i want.