Door adjustment hellp!!

[ken3983]

I have a 91 RS.The passenger door is'nt flush at the top.It seems to be anywhere from 1/4" to maybe 3/8" off from meeting the body.You can really tell the difference inside when you look at the molding.Is there a way to loosen the bolts to "roll" the door back into place and get it flush or is this a take it to the shop kinda deal?Thanks Ken

[Thrashdrums]

are you talking about the door itself or the glass on the window? my 1991 Firebird has adjustment and i would assume your camaro is the same, the hinges where the front of the door is attached control the front allignment and the receiving pin where the back side of the door latches adjusts the back side of the door..... it's kinda trickey to explain...... the hardest adjustment i had was the rear hatchs i had to bevel out the mounting holes to get it seated properly, and there isn't much clearance on either side, plus if i's not snug it'll leak water so..... hope that was of some use, just look for bolts holding the hinges on for the front and the back takes a star type driver-bit i believe.......